Epson SC-P10000 SERIES User Manual Download Page 39

Page: 39 / 217

Note:

The paper that can be used in the printer is detailed in
the following section.

“Supported Media” on page 182

Buttons that are used in the following settings

Turn on the printer by pressing the

button.

Note:

After finishing operations, return the support bar
to the storage position.

Press the

button on the control panel. Press

the

button to highlight

Cut Sheet

and

press the

button.

Feed the paper into the paper slot with the
printable surface toward you.

Insert the paper into the paper slot, keeping its
right edge aligned with the loading mark on the
roll paper cover. Slide the paper in until it stops.

Important:

Insert all paper in portrait orientation.
Inserting paper in landscape orientation may
cause a decline in print quality.

SC-P20000 Series/SC-P10000 Series User's Guide

Basic Operations

Summary of Contents for SC-P10000 SERIES


























































































































































































































Search results

Summary of Contents for SC-P10000 SERIES

Reviews:

Brands by name

Popular brands

Epson SC-P10000 SERIES, User Manual

Search results

Summary of Contents for SC-P10000 SERIES

Reviews:

Brands by name

Popular brands