Item
Description
Auto Cleaning
Standard
*
Auto cleaning is adjusted depending on the clogged status of the
nozzles. Auto cleaning is not supported from Printless Nozzle Check.
Standard: When nozzles are clogged, cleaning is performed
automatically. We generally recommend operating with this setting
set to
Standard
.
Light: When more than two nozzles are clogged, cleaning is
performed automatically. Cleaning is not performed for one nozzle.
Decreases the number of times that operations stop for cleaning
compared to
Standard
. However, print quality cannot be guaranteed.
Light
NozzleCheck while
Print
1 hour
2 hours
3 hours
4 hours
Off
*
If printing 1 page, such as a banner, takes several hours, select
whether to do an automatic nozzle check while printing. If it is not
set to
Off
, nozzle checks start automatically when the selected time
comes while a page is being printed. Then, if there is a clog, cleaning
begins. However, because cleaning is done while printing, the print
results may be scuffed or the colors may be uneven before and after
cleaning, depending on the media and print conditions.
Post-print Nozzle-
Check
On
*
Select (
On
)/(
Off
) whether to automatically check the nozzles after a
print job is finished (after the last job if there are multiple
consecutive jobs). We generally recommend operating with this
setting set to
On
to maintain good printing quality. There is a risk
that the print heads may malfunction if this is turned
Off
.
Off
Auto Cleaning Start
On
*
Select (
On
)/(
Off
) whether to automatically clean the nozzles when
clogged nozzles are detected by the automatic nozzle check
function. We generally recommend operating with this setting set to
On
to maintain good printing quality. If you select
Off
, a message is
displayed to select whether or not to execute cleaning or to
continue printing if the automatic check function detects a clogged
nozzle. Check the message, and select the appropriate operation.
Off
Manage HDD
*1
If
Yes
is selected, an optional hard disk unit or Adobe PostScript 3
Expansion Unit that is connected to the printer is formatted.
Formatting the hard disk unit or Adobe PostScript 3 Expansion Unit
deletes all stored print jobs.
Hard disk units or Adobe PostScript 3 Expansion Units that have
been used with other printers must be formatted before they can be
used with this printer.
Format Hard Disk
Yes
No
Printer Mode
Auto
Normally, leave the setting at
Auto
. Sent print data is identified, and
the mode is switched automatically. Set the mode if operation mode
switching and printing are not performed correctly.
PostScript
*2
Date And Time
MM/DD/YY HH:MM
Set the printer’s built-in clock. The time provided by the clock is
used when printing logs and status sheets.
Time Zone
Enter the difference between the current time zone and GMT.
The selected time zone is used in e-mail notifications sent by
Remote Manager when an error occurs.
Reset PS Settings
*2
Yes
Select
Yes
to initialize the user font and user ICC profile saved in the
user area of the Adobe PostScript 3 Expansion Unit. Initialization
deletes saved data.
No
Reset All Settings
Yes
Select
Yes
to restore defaults for all settings except the Date And
Time, Language, and Unit: Length options in the Setup menu.
No
SC-P20000 Series/SC-P10000 Series User's Guide
Using the Control Panel Menu
140
