Epson PP-100N - Discproducer - DVD Duplicator x2 User Manual Download Page 89

Page: 89 / 174

Publishing Discs

Insert the stacker, and close the disc cover.

•

Do not load discs above the red line on the stacker. The product may malfunction, or

the discs may be damaged.

•

Make sure that the bottom of the stacker is not dirty before loading the discs.

•

For Batch Mode, make sure that no discs are loaded in Stacker 3 and Stacker 4.

•

For Batch Mode, set the lock lever to the [LOCK] position, and do not pull out Stacker 4.

•

Stacker 3 is not used in Standard Mode and External Output Mode,

Summary of Contents for PP-100N - Discproducer - DVD Duplicator x2















































































































































































Search results

Summary of Contents for PP-100N - Discproducer - DVD Duplicator x2

Reviews:

Related manuals for PP-100N - Discproducer - DVD Duplicator x2

Brands by name

Popular brands

Epson PP-100N - Discproducer - DVD Duplicator x2, User Manual

Search results

Summary of Contents for PP-100N - Discproducer - DVD Duplicator x2

Reviews:

Related manuals for PP-100N - Discproducer - DVD Duplicator x2

Brands by name

Popular brands