Epson PP-100N - Discproducer - DVD Duplicator x2, User Manual

Page: 7 / 174

7
Before Using This Product
WARNING
•
Do not use flammable gas sprays inside or around this product. There is a
risk that gas will build up and a spark may cause a fire.
•
Do not install in a place where volatile substances, such as alcohol or paint
thinner, are present or in a place where there is fire.
This may result in electric shock or fire.
CAUTION
Place the product on a flat, stable surface that extends beyond the base of the
product in all directions. If you place the product by the wall, leave more than
10 cm between the back of the product and the wall. The product will not
operate properly if it is tilted at an angle.
Do not install or store in an unstable place (such as on a wobbly or tilted
surface), in reach of children, or in a place subject to vibration from other
machines.
There is a risk that it could drop or fall over, resulting in injury.
Do not install in places where there is excessive moisture or dust, risk of getting
wet, direct sunlight, severe changes in temperature and humidity, or close to
heating and cooling devices.
There is a risk of electric shock, fire, and malfunction or failure of this product.
Do not block the air vents on this product.
Blocking the air vents may result in internal heat build-up and fire.
Do not install in the following types of places.
•
Tight spaces where ventilation is poor, such as in a closet or on a bookshelf
•
On a rug or bed
If you place the product by the wall, leave more than 10 cm between the
back of the product and the wall. It is also necessary to leave enough space
in front of the product to open and close the disc cover.