Epson PP-100N - Discproducer - DVD Duplicator x2 User Manual Download Page 37

Page: 37 / 174

Preparation

Changing user information

Use the procedure below to change the full name and email address of a user.

See “Logging in to EPSON Total Disc Net Administrator” on page 55 in this guide for the login procedure.

Click [Edit user] in the [User information] tab.

Change the full name or email address, and click [Save].

Click [OK].

The [User information] screen appears.

Check that the modified information is correct.

Summary of Contents for PP-100N - Discproducer - DVD Duplicator x2















































































































































































Search results

Summary of Contents for PP-100N - Discproducer - DVD Duplicator x2

Reviews:

Related manuals for PP-100N - Discproducer - DVD Duplicator x2

Brands by name

Popular brands

Epson PP-100N - Discproducer - DVD Duplicator x2, User Manual

Search results

Summary of Contents for PP-100N - Discproducer - DVD Duplicator x2

Reviews:

Related manuals for PP-100N - Discproducer - DVD Duplicator x2

Brands by name

Popular brands