Epson PP-100N - Discproducer - DVD Duplicator x2 User Manual Download Page 151

Page: 151 / 174

151

Maintenance

Press the power button to turn off the power.

When the power LED goes out, disconnect the power cord and Ethernet cable.

Attach protective materials to the arm, and secure them with tape.

Attach Stacker 1, Stacker 2, and Stacker 3, and secure them with tape.

Open the ink cartridge cover, and secure the ink cartridges with tape.

Close the ink cartridge cover, disc cover, and Stacker 4, and secure them with tape.

With the bottom of the product facing downwards, place the product into the packing box
so that it is oriented horizontally.

Summary of Contents for PP-100N - Discproducer - DVD Duplicator x2















































































































































































Search results

Summary of Contents for PP-100N - Discproducer - DVD Duplicator x2

Reviews:

Related manuals for PP-100N - Discproducer - DVD Duplicator x2

Brands by name

Popular brands

Epson PP-100N - Discproducer - DVD Duplicator x2, User Manual

Search results

Summary of Contents for PP-100N - Discproducer - DVD Duplicator x2

Reviews:

Related manuals for PP-100N - Discproducer - DVD Duplicator x2

Brands by name

Popular brands