Epson PP-100N - Discproducer - DVD Duplicator x2 User Manual Download Page 88

Page: 88 / 174

Loading discs

This section describes how to load discs in the stacker, and insert the stacker.

Fully separate the discs to prevent them from sticking together.

Take out the input stacker and load the discs into it.

The stacker to use as the input stacker differs depending on the set Publish Mode. Confirm the input stacker in
the following table.

Load the discs in a stacker. Do not load discs in the drives or printer. Furthermore, do not

load discs between Drive 1 and Drive 2. They may become unable to be taken out.

•

Be sufficiently careful not to scratch a disc.

•

If a long time elapses after discs are loaded in the stacker, the separated discs may

stick together again. Fan the discs again if a long time has elapsed since they were

loaded.

Publish Mode

Input Stacker

Number of Discs

Standard Mode

Stacker 1

Up to approximately 50 discs

External Output Mode

(Different types of discs can be loaded into Stacker 1

and Stacker 2.)

Stacker 1

Up to approximately 50 discs

Stacker 2

Up to approximately 50 discs

Batch Mode

Stacker 1

Up to approximately 50 discs

Stacker 2

Up to approximately 50 discs

Place the label surface facing upwards.

Summary of Contents for PP-100N - Discproducer - DVD Duplicator x2















































































































































































Search results

Summary of Contents for PP-100N - Discproducer - DVD Duplicator x2

Reviews:

Related manuals for PP-100N - Discproducer - DVD Duplicator x2

Brands by name

Popular brands

Epson PP-100N - Discproducer - DVD Duplicator x2, User Manual

Search results

Summary of Contents for PP-100N - Discproducer - DVD Duplicator x2

Reviews:

Related manuals for PP-100N - Discproducer - DVD Duplicator x2

Brands by name

Popular brands