Epson EPL-7000, User Manual

Page: 65 / 330

SelecType Overview
The SelecType function on the printer control panel allows you to
control many of the printer’s functions. Use SelecType’s menu-
based system to change your printer’s configuration without using
DIP switches and to select most font and print options without
using software commands.
Your application program may send printer commands that
temporarily override the SelecType settings. If you are not getting
the
results you expect, check your application software settings,
Note:
New SelecType settings are in effect only until you turn
off the printer, unless you save them with the Level 1 SYSTEM
CONFIG option or the Level 2 P-CONFIG.SAVE option
described later in this chapter.
SelecType is divided into two levels as shown below. Level 1
contains everyday printing and font selection functions, and Level
2 contains functions
that
are less likely to be changed frequently,
such as printer mode and printer configuration. A brief description
of each main menu option follows. See SelecType Options later in
this chapter for detailed descriptions of all SelecType options.
Level 1
CH SELECT
INPUT
P-SIZE
COPIES
ORIENT.
FONT
STATUS SHEET
SUB CONFIG.
SYSTEM CONFIG.
Level 2
TEST PRINT
CH CONFIG
MEMORY SHARE
CH TIMEOUT
AUTO CONT.
BEEPER
P-CONFIG. SAVE
FACTORY RESET
VERSION
STANDBY
3-2
SelecType