Epson EPL-7000, User Manual

Page: 71 / 330

Using SelecType
Select channel
If you have connected computers to both interfaces and set the
MEMORY SHARE option, whenever you enter SelecType Level
1,
the display shows the channel select option, as shown below. If
you have not set up both interfaces, SelecType skips this option
and the display shows one of the Level 1 main menu options.
CAUTION:
If you have attached a printer to each
interface and want to share the printer, you must add
additional memory to the printer. (See Appendix A.)
Then you must set the MEMORY SHARE option in
Level 2 before you select the channel. If you have not set
the MEMORY SHARE option, CH P is selected.
After you select the channel, one of the main menu options
appears on the display. The printer stores the settings for each
channel separately. The settings you choose for one channel do not
affect the settings of the other.
Move to the desired option
When you enter SelecType Level 1 or Level
2,
one of the main
menu options appears on the display. To look at the other options
at this level, you can use the and buttons.
Press until the INPUT option appears on the display, as
shown below.
3-8 SelecType