Epson EPL-6000, User Manual

Page: 69 / 219

Using SelecType
Interface submenu
To enter the interface submenu from the main menu, follow the
steps below:
1. Press the or button until you see the
I/F
function in the
display.
2. Press the
SET
button to activate the menu option. (The option
starts blinking, indicating that it has been activated.)
3. If the
I/F
function
is
set to
the PARALLEL
option, press the
button to select the
SERIAL
option.
4. Press the
SET
button to set the
SERIAL
option. An asterisk (*)
appears next to SERIAL.
5. Press the
SET
button a third time to enter the interface submenu,
where you can change options for the menu functions listed
below. (The SelecType Options section in this chapter describes
options for these functions in detail.)
BAUD RATE
PROT
DATA BIT
PARITY
STOP BIT
ROBUST-XON
6. Use the or button to move to a function you want to
change.
Note: This submenu does not work in a loop. Pressing the
button when BAUD
RATE
is displayed or pressing the
button when
ROBUST-XON
is displayed causes you to exit the
submenu and return to the main menu.
3-16 Using the Printer