manualshive.com logo in svg

Epson EPL-6000, User Manual

Share
Download
Epson EPL-6000 User Manual Download Page 55

The Control Panel

The EPL-6000 control panel gives you control over many printer
functions, including interface settings, font selection, and paper size.
The control panel is made up of three elements: an LCD (liquid
crystal display), Lights, and buttons. The buttons let you select

options for SelecType printer functions, while the indicator lights
and the display let you monitor the current status of the printer.

Control panel display

The display on the left side of the control panel lets you monitor the
printer’s status and view SelecType functions and their available
options. The display gives you three types of information, as
described below:

l

Status messages, which appear in the display as part of the
normal operation of your printer, indicate the printer’s current
status.

DATA IN BUFFER

FONT PRINT

This message appears after the printer
receives data without a form feed
command. The printer is waiting to receive
more data or a form feed command or for

you to 

press the 

RESET/CONTINUE 

button to

print the page.

This message appears when you run the
font print test, which prints all available
fonts in HP emulation.

3-2

Using the Printer

Summary of Contents for EPL-6000




























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands