manualshive.com logo in svg

Epson EPL-6000, User Manual

Share
Download
Epson EPL-6000 User Manual Download Page 24

Assembling the Printer

Note: 

Put the developer cleaner and magnetic cleaner in a safe

place for now. You’ll need to use the developer cleaner if vertical
white lines appear on your printed pages. The magnetic cleaner is
useful for removing excess toner from the paper guide. Usage of
these two accessories is described in Chapter 6.

Installing internal components

This section describes how to install internal components, including
the drum unit, drum replacement cartridge, cleaning pad, and
developer unit.

The drum unit, drum replacement cartridge, cleaning pad, and
toner cartridge (which is attached to the developer unit) need to be
replaced periodically. See Chapter 6 for details.

WARNING: 

When handling the drum, developer unit, or

basket, always set them on a clean, smooth surface. Be
sure not to scratch or mar the roller on the developer unit

or the surface of the drum. Also avoid touching the drum,
since oils from your skin can permanently mar its surface
and affect print quality.

Setting Up the Printer

1-11

Summary of Contents for EPL-6000




























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands