Epson EPL-6000, User Manual

Page: 158 / 219

Error Messages
CHANGE DRUM
The drum unit may not be installed properly. Open
the
printer and
make sure the drum unit is seated properly in
the
basket. (Press
down simultaneously on the drum unit’s two green handles to
make
sure the unit has clicked into place.)
Also,
the
drum replacement cartridge may
not
be installed. Be sure
to install a new drum replacement cartridge each time you replace
the drum unit.
If the message remains, the drum unit and the drum replacement
cartridge must be replaced. See the section on replacing the drum
unit in Chapter 6.
COVER OPEN
The printer cover is open. Close the cover and press
the ON LINE
button to set the printer on line and begin normal printing.
ERROR 20
Not enough
memory
is available. Press the
RESET/CONTINUE
button
to continue printing. Your page may be printed as two or more
separate pages. This error
can also
be cleared by turning
the
printer
off and back
on
again. It may be necessary to simplify your print job
by downloading a smaller font, deleting some macros, or using a
lower resolution. You may also wish to purchase the optional 2MB
memory board available for this printer.
ERROR 21
The page is too complex to print. Press the
RESET/CONTINUE
button
to eject the page and clear
the
error. This error
can
also be cleared by
turning
the printer off and back
on
again. Before you continue
printing, simplify
the
page you are trying to print.
Troubleshooting 7-3