Epson EB-PU1006W User Manual Download

Page: 151 / 191

Projector Indicator Status

151

Indicator and status

Problem and solutions

Power: Flashing blue
Status: Off
Laser: Off
Temp: Off
Filter: Off

Preparing to enter

USB Power in Standby

mode.

Power: Lit blue
Status: Lit blue
Laser: Flashing blue
Temp: Off
Filter: Off

A/V Mute is in progress.

Power: Indicator status

varies
Status: Flashing blue
Laser: Flashing orange
Temp: Indicator status

varies
Filter: Indicator status

varies

Refresh Mode is in progress.

Reset

Refresh Mode

Power: Flashing blue
Status: Indicator status

varies
Laser: Indicator status

varies
Temp: Flashing orange
Filter: Indicator status

varies

Projector is too hot.
• Make sure that the vents and air filter are not clogged

with dust or obstructed by nearby objects.

• Clean or replace the air filter.
• Make sure the environmental temperature is not too

hot.

Indicator and status

Problem and solutions

Power: Off
Status: Flashing blue
Laser: Off
Temp: Lit orange
Filter: Off

Projector has overheated and turned off. Leave it turned

off to cool down for 5 minutes.
• Make sure that the vents and air filter are not clogged

with dust or obstructed by nearby objects.

• Make sure the environmental temperature is not too

hot.

• Clean or replace the air filter.
• If operating the projector at high altitude, set the

High

Altitude Mode

setting to

in the projector's menu.

Extended

Operation

High Altitude Mode

• If the problem persists, unplug the projector and

contact Epson for help.

Power: Flashing blue
Status: Indicator status

varies
Laser: Flashing orange
Temp: Indicator status

varies
Filter: Indicator status

varies

Laser warning.
Turn the projector off, unplug it, and contact Epson for

help.

Power: Flashing blue
Status: Indicator status

varies
Laser: Flashing orange
Temp: Indicator status

varies
Filter: Indicator status

varies

Lens warning.
An unsupported lens is attached; remove the

unsupported lens and attach a lens that is supported.

Power: Off
Status: Flashing blue
Laser: Lit orange
Temp: Off
Filter: Off

Laser or retardation plate has a problem.
Turn the projector off, unplug it, and contact Epson for

help.

Summary of Contents for EB-PU1006W
































































































































































































Search results

Summary of Contents for EB-PU1006W

Reviews:

Related manuals for EB-PU1006W

Brands by name

Popular brands

Epson EB-PU1006W, User Manual

Search results

Summary of Contents for EB-PU1006W

Reviews:

Related manuals for EB-PU1006W

Brands by name

Popular brands