Network Menu
108
PJLink Notification
s
Network
>
Network Configuration
>
Notifications
>
PJLink
Notification
Set to
On
to enable the PJLink notification function when the PJLink setting
is enabled.
Notified IP Address
s
Network
>
Network Configuration
>
Notifications
>
Notified IP
Address
Enter the IP address to receive the projector's operating status when the
PJLink notification function is enabled. Enter the addresses using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Command Communication
s
Network
>
Network Configuration
>
Others
>
Command
Communication
You can select the authentication method for command communication.
Protected
Select when performing a digest authentication using
Web Control
Password
. You need to install the latest version of the Epson Projector
Management software.
Compatible
Select when performing plain text authentication using the Monitor
Password (up to 16 alphanumeric characters long).
a
Select
Compatible
when monitoring projectors with a switcher and a
system controller or using Epson Projector Management ver.5.30 or
earlier.
Secure HTTP
s
Network
>
Network Configuration
>
Others
>
Secure HTTP
To strengthen security, communication between the projector and computer
in Web control is encrypted. When setting security with Web control, it is
recommended to set this to
On
.
Web Server Certificate
s
Network
>
Network Configuration
>
Others
>
Web Server Certificate
Imports the Web server certificate for secure HTTP.
Web API Settings
s
Network
>
Network Configuration
>
Others
>
Web API Settings
You can select the Web API settings when using Web API communications.
Web API
Set to
On
to enable the Web API function.
Authentication
You can set the security for your projector to use during Web API
communications.
Open
Security is not set.
Digest
Communication is performed using API authentication (Digest
authentication).
