Extended Menu
97
Top Edge/Bottom Edge/Right Edge/Left Edge
Select the edge you want to blend on each projector.
•
Blending
to turn on the Edge Blending feature for the selected edge.
Gradation is applied to the blending range.
•
Blend Start Position
to adjust the point where edge blending begins in 1
pixel increments. The blending start position is displayed with a red line.
•
Blend Range
to select the width of the blended area in 1 pixel
increments. You can select up to 45% of the projector's resolution.
•
Blend Curve
to select a gradient for the shaded area on the projected
image.
Line Guide
Set to
On
to display a guide on the blended area.
Pattern Guide
Set to
On
to display a grid to match the blended area.
Guide Color
Select a combination of guide colors.
a
Set the
Color Mode
setting to
Multi-Projection
in the projector's
Image
menu for all of the projectors.
Black Level
s
Extended
>
Multi-Projection
>
Black Level
s
Extended
>
Multi-Projection
>
Screen Matching
>
Black Level
You can adjust the brightness and tone differences in overlapping images.
Color Adjustment
You can adjust the brightness and tone of the areas. The adjustment areas
are displayed based on the
Edge Blending
setting.
When multiple screens are overlapping, adjust overlapping areas starting
with the brightest areas first. Adjust the non-overlapping area (darkest
part) last.
Area Correction
If the tone for some areas does not match, you can adjust it individually.
Reset
You can reset all adjustment values on the
Black Level
menu to their
default settings.
a
• You cannot adjust the
Black Level
setting when a test pattern is
displayed.
• If the
Geometry Correction
value is very large, you may not be able
to adjust the
Black Level
correctly.
• The brightness and tone may differ in areas where the images overlap
as well as in other areas even after performing
Black Level
adjustment.
• If you change the
Edge Blending
setting, the
Black Level
setting
returns to its default value.
• Available only when at least one of
Top Edge
,
Bottom Edge
,
Left
Edge
, and
Right Edge
are set to
On
in the
Edge Blending
settings.
Reset (Multi-Projection menu)
s
Extended
>
Multi-Projection
>
Reset
You can reset all adjustment values on the
Multi-Projection
menu to their
default settings.
Screen Matching
s
Extended
>
Multi-Projection
>
Screen Matching
You can adjust the tint, brightness, black level, and blend curve of multiple
projectors so that they match better.
If your projectors are on a network, the brightness and tint for multiple
projectors are corrected automatically based on the darkest projector.
