Epson EB-PU1006W User Manual Download

Page: 13 / 191

Projector Parts and Functions

Name

Function

Caution

Do not place any objects or put your hand near

the projection lens. It could cause burns, fire,

or the object to warp because this area reaches

a high temperature due to the concentrated

projection light.

Remote receivers

Receive signals from the remote control.

Indicator lights

Indicate the projector's status.

Air intake vent (air

filter)

Takes in air to cool the projector internally.

USB-A port
(USB connector Type

Use to install the wireless LAN module.

Wireless LAN

indicator

Indicates the access status of the wireless LAN module.

Cable cover

Cover for the rear interface ports section.

Lens replacement

cover

Remove when attaching or removing the lens.

Caution

When moving the projector, do not hold the

lens replacement cover. The lens replacement

cover may be removed and the projector may

fall, which could cause an injury.

Name

Function

Air exhaust vent

Exhaust vent for air used to cool the projector

internally.

Caution

While projecting, do not put your face or

hands near the air exhaust vent, and do not

place objects that may become warped or

damaged by heat near the vent. Hot air from

the air exhaust vent could cause burns,

warping, or accidents to occur.

Related Links

• "Projector Indicator Status"

p.150

• "Installing the Wireless LAN Module"

p.39

Projector Parts - Rear

Summary of Contents for EB-PU1006W
































































































































































































Search results

Summary of Contents for EB-PU1006W

Reviews:

Related manuals for EB-PU1006W

Brands by name

Popular brands

Epson EB-PU1006W, User Manual

Search results

Summary of Contents for EB-PU1006W

Reviews:

Related manuals for EB-PU1006W

Brands by name

Popular brands