Installing the ultra short
throw lens
The ultra short throw (UST) lens allows you to position your projector as close as possible to the
screen.
Affected products
The following products are affected:
•
D13HD2-HS
•
D13WU2-HS
•
D16HD-HS
•
D16WU-HS
•
D20HD-HS
•
D20WU-HS
•
Christie 4K7-HS
•
Christie 4K10-HS
Required components
The following components are required.
•
UST lens bracket kit (P/N: 003-006916-XX)
•
3 mm Allen key
•
5 mm Allen key
•
6 mm Allen key
•
Hexagon wrench
Mounting the lens support bracket
The lens holders are replaceable parts marked with an A for the HS Series 2K models and T for the
4K7-HS and 4K10-HS models.
1. Turn on the projector and perform a lens calibration.
•
If you have a non-ultra short throw lens (standard lens) installed, perform a lens
calibration by selecting Menu > Configuration > Lens Settings > Lens Calibration.
•
If you do not have a non-ultra short throw lens, complete the following steps:
Installing the Ultra Short Throw Lens Instruction Sheet
1
020-103312-03 Rev. 1 (10-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
