Detect Double Feed:
Display a warning when multiple originals are fed at the same time.
❏
Ultrasonic sensor: Detect a double feed using an ultrasonic sensor. You can specify the detection
range.
❏
Length: Detect a double feed by the length. When the length of the second original scanned is
different from the first, this is identified as a double feed. You can specify the difference in length
for detection.
File Name:
❏
Filename Prefix:
Enter a prefix for the name of the images in alphanumeric characters and symbols.
❏
Add Date:
Add the date to the file name.
❏
Add Time:
Add the time to the file name.
Clear All Settings
Resets the scan settings to their defaults.
Scanning Originals to an Email
You can send the scanned image by email directly from the scanner. Before scanning, you need to configure the
email server.
You can specify the email address by entering directly, but it may be easier if you register the email address in the
contacts list first.
Note:
❏
Make sure the scanner’s
Date/Time
and
Time Difference
settings are correct. Select
Settings
>
Basic Settings
>
Date/
Time Settings
on the control panel.
❏
You can check destination before scanning. Select
Settings
>
Scanner Settings
, and then enable the
Confirm Recipient
.
1.
Place the originals.
2.
Select
on the home screen of the scanner’s control panel.
3.
Specify the destination.
>
Scanning Using the Scanner's Control Panel
>
Scanning Originals to an Email
77
