3.
If the
Select Computer
screen is displayed, select the computer.
Note:
❏
The scanner’s control panel displays up to 111 computers on which Document Capture Pro is installed.
❏
If
Server Mode
is set as the operation mode, you do not need to perform this step.
4.
If the
Select Job
screen is displayed, select the job.
Note:
If you have set only one job, you do not need to select the job. Proceed to the next step.
5.
Confirm the computer and the job you selected.
Note:
Select
to save your settings as a preset.
6.
Tap
x
.
Document Capture Pro automatically starts on your computer, and scanning starts.
Related Information
&
&
“Creating a Job and Assigning a Job to the Control Panel (Windows)” on page 111
&
“Assigning a Job to the Control Panel (Mac OS)” on page 112
Scanning to a Network Folder
You can save the scanned image to a specified folder on a network. You can specify the folder by entering a folder
path directly, but it may be easier if you register the folder information in the contacts list first.
Before scanning, you need to set a network folder or FTP server.
Note:
❏
Make sure the scanner’s
Date/Time
and
Time Difference
settings are correct. Select
Settings
>
Basic Settings
>
Date/
Time Settings
on the control panel.
❏
You can check destination before scanning. Select
Settings
>
Scanner Settings
, and then enable the
Confirm Recipient
.
1.
Place the originals.
2.
Select
Network Folder/FTP
on the home screen of the scanner’s control panel.
>
Scanning Using the Scanner's Control Panel
>
72