Epson AcuLaser MX20 Series User Manual Download Page 177 | Manualshive

Page: 177 / 286

background image

A read/write error has occurred for the toner cartridge. Remove the toner cartridge and reinsert it. If
that fails to clear the error, replace the toner cartridge. To install the toner cartridge, see “Replacing
Consumable Products/Maintenance Parts” on page 194.

Image Optimum

There is insufficient memory to print the page at the specified print quality. The printer automatically
lowers the print quality so that it can continue printing. If the quality of the printout is not acceptable,
try simplifying the page by limiting the number of graphics or reducing the number and size of fonts.

To clear this error, select

Clear Warning

from the

Reset Menu

in the Setup menu’s

Common

Settings

. See “Accessing the each menu” on page 138 for instructions.

You may need to increase the amount of printer memory to be able to print at the desired print quality
for your document. For more information on adding memory, see “Memory Module” on page
190.

Install Cassette1

/

Install Cassette2

The paper cassette is not installed in the printer.

Install the indicated paper cassette.

Install Toner Cartridge

The toner cartridge is not installed in the printer.

Install the indicated cartridges. See “Toner Cartridge/Return Toner Cartridge” on page 280.

Invalid Data

The spool file on the driver is deleted while printing or the data is abnormal. Select

Close

to clear the

error.

Invalid PS3

There are errors in the ROM module. Turn off the printer and contact your dealer.

“Layout” is set.

You started copying with the layout function. Set the

Layout

setting under the

Advanced

tab to

Off

.

Epson AcuLaser MX21/MX20 Series User's Guide

Using the Control Panel

177

«
...
175
176
177
178
179
...
»

Summary of Contents for AcuLaser MX20 Series































































































































































































































































































Reviews:

No comments

Related manuals for AcuLaser MX20 Series

MultiPASS L6000

Brand: Canon Pages: 251

MultiPASS C5500

Brand: Canon Pages: 24

MultiPASS L6000

Brand: Canon Pages: 24

Laser Class 700 Series

Brand: Canon Pages: 221

Panafax UF-7000

Brand: Panasonic Pages: 28

Brand: Panasonic Pages: 68

Brand: Panasonic Pages: 120

Brand: Panasonic Pages: 100

KX-MB781 - B/W Laser - All-in-One

Brand: Panasonic Pages: 96

Brand: Panasonic Pages: 130

Brand: Oki Pages: 210

Brand: Panasonic Pages: 77

Brand: Panasonic Pages: 402

Brand: Panasonic Pages: 54

Workio DP-8016P

Brand: Panasonic Pages: 88

Brand: Panasonic Pages: 60

Brand: Panasonic Pages: 9

Brand: Panasonic Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands