![Epson AcuLaser MX20 Series User Manual Download Page 126](http://html.mh-extra.com/html/epson/aculaser-mx20-series/aculaser-mx20-series_user-manual_108693126.webp)
Sending faxes using quick-dial
When a frequently used recipient fax number is assigned for the
Quick-Dial
button (
1
to
12
), you can
send fax to the recipient by simply pressing the corresponding
Quick-Dial
button.
Note:
Before using the quick-dial function, you need to register recipient fax information in advance. For
details, see “Registering Recipients” on page 134.
1. Place your original either on the document table or in the Auto Document Feeder. For details on
how to set your original, see “Setting Your Originals” on page 47.
2. Press the
Quick-Dial
button on the control panel.
3. Make sure that your desired recipient is displayed on the LCD panel.
Note:
Make the appropriate settings if necessary. For details about the settings, see “Manual faxing” on
page 124.
4. Press the
Start
button to start the transmission.
Sending faxes using re-dial
You can send a fax to the last dialed number by simply pressing the
Redial/Pause
button.
Note:
Once the mode is changed to other than Fax mode, you cannot use the redial function.
1. Place your original either on the document table or in the Auto Document Feeder. For details on
how to set your original, see “Setting Your Originals” on page 47.
2. Press the
Redial/Pause
button on the control panel.
3. Make sure that your desired recipient is displayed on the LCD panel.
Note:
Make the appropriate settings if necessary. For details about the settings, see “Manual faxing” on
page 124.
4. Press the
Start
button to start the transmission.
Epson AcuLaser MX21/MX20 Series User's Guide
Faxing (DNF Model Only)
126