Advanced
Tab
Item
Settings (default in bold)
Send Foreign Setting
Off
, On
5. Press the
Start
button to start the transmission.
Manual faxing
You can send faxes, after confirming that the telephone line is connected to the receiving system, by
using the
On-hook Dialing
button or by attaching an external telephone to your printer.
If the printer is connected to a telephone, you can talk with the recipients before sending faxes.
1. Press the
Fax
button.
2. Place your original either on the document table or in the Auto Document Feeder. For details on
how to set your original, see “Setting Your Originals” on page 47.
3. Make the appropriate settings if necessary. For details about the settings, see “Basics of sending
faxes (automatic faxing)” on page 123.
4. Press the
On-hook Dialing
button, and then enter the recipient’s fax number directly from the
numeric keypad on the control panel.
Note:
When using an external telephone, enter the number with the telephone.
5. Make sure that the telephone line is connected, and then press the
Start
button.
6. Select
Manual Transmission
, and then press the
Start
button to start the transmission.
Note:
When using an external telephone, hang up the handset after
Hang Up Receiver
is displayed.
Epson AcuLaser MX21/MX20 Series User's Guide
Faxing (DNF Model Only)
124
