manualshive.com logo in svg

Epson AcuLaser MX20 Series, User Manual

Share
Download
Epson AcuLaser MX20 Series User Manual Download Page 185

You started printing from a USB memory while multiple jobs are stored in the printer. Wait for a few
minutes, and then try again.

Warming Up

The printer is warming up so that printing, copying, faxing, or scanning can be done.

Write Error ROM P

The printer is unable to write data to the ROM module correctly. You cannot remove the ROM P
because the ROM P is a program ROM module. Contact your dealer.

Writing and saving files on PC

The connection test is carried out. The printer is testing to write and save data to the specified shared
folder on the network.

Writing ROM P

The printer is writing data into the ROM module in the ROM slot P.

Printing a Status Sheet

1. Press the 

Setting

 button.

2. Use the 

u

 Up and 

d

 Down buttons to select 

System Information

, and then press the 

OK

button.

3. Use the 

u

 Up and 

d

 Down buttons to select 

System Report Printing

, and then press the 

OK

button.

4. Use the 

u

 Up and 

d

 Down buttons to select 

Status Sheet

, and then press the 

OK

 button.

Note:

❏

If the status sheet does not list your installed options correctly, make sure that they are securely
connected to the printer.

❏

If you are unable to get the printer to print a correct status sheet, contact your dealer.

❏

Print the status sheet on A4 size paper.

Epson AcuLaser MX21/MX20 Series     User's Guide

Using the Control Panel     

185

Summary of Contents for AcuLaser MX20 Series































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands