Epson AcuLaser MX20 Series User Manual Download Page 266

Page: 266 / 286

5. Select

Local printer

, then click

Next

Note:

Do not select the

Automatically detect and install my Plug and Play printer

check box.

6. Select

USB

as the port the printer is connected to, then click

Next

7. Click

Have Disk

and specify the following path for the Software Disc. If your CD-ROM drive is D:,

the path will be D:\ADOBEPS\ENGLISH\PS_SETUP. Then click

Note:

Change the drive letter as needed for your system.

8. Select the printer, then click

Next

9. Follow the on-screen instructions for the rest of the installation.

10. When installation is done, click

Finish

Installing the PostScript printer driver for the network interface

Note:

❏

Set the network settings before installing the printer driver. Refer to the Network Guide that comes
with your printer for details.

❏

Turn off all virus protection programs before installing the printer software.

1. Make sure that the printer is turned on. Insert the printer Software Disc into your CD-ROM

drive.

2. For Windows 7, click the start button, select

Devices and Printers

, and click the

Add a printer

button.
For Windows Vista, Vista x64, XP, XP x64, Server 2008, or Server 2008 x64, click

Start

, point to

Printer and Faxes

, and click

Add a printer

in the Printer Tasks menu.

For Windows 2000, Server 2003, or Server 2003 x64, click

Start

, point to

Settings

, and click

Printers

. Then double-click the

Add Printer

icon.

3. The Add Printer Wizard appears. Then click

Next

4. Select

Local printer

, then click

Next

Epson AcuLaser MX21/MX20 Series User's Guide

About the Printer Software

266

Summary of Contents for AcuLaser MX20 Series































































































































































































































































































Search results

Summary of Contents for AcuLaser MX20 Series

Reviews:

Brands by name

Popular brands

Epson AcuLaser MX20 Series, User Manual

Search results

Summary of Contents for AcuLaser MX20 Series

Reviews:

Brands by name

Popular brands