![Epson AcuLaser MX20 Series User Manual Download Page 267](http://html.mh-extra.com/html/epson/aculaser-mx20-series/aculaser-mx20-series_user-manual_108693267.webp)
Note:
Do not select the
Automatically detect and install my Plug and Play printer
check box.
5. Select the
Create a new port check box and select Standard TCP/IP Port
from the drop-down
list. Click
Next
.
6. Click
Next
.
7. Specify the IP address and port name, then click
Next
.
8. Click
Finish
.
9. Click
Have Disk
in the Add Printer Wizard and specify the following path for the Software Disc. If
your CD-ROM drive is D:, the path will be D:\ADOBEPS\ENGLISH\PS_SETUP.
Then click
OK
.
Note:
Change the drive letter as needed for your system.
10. Select the printer and click
Next
.
11. Follow the on-screen instructions for the rest of the installation.
12. When installation is done, click
Finish
.
Accessing the PostScript printer driver
You can change the PostScript printer driver settings in the PostScript printer driver. To access the
printer driver, see “Accessing the printer driver” on page 253.
Using AppleTalk under Windows 2000
Use the following settings if your machine is running Windows 2000, and the printer is connected
through an network interface using the AppleTalk protocol:
❏
Select
PS3
as the Network setting in the control panel’s
Emulation Menu
.
❏
On the Device Settings sheet of the printer’s Properties dialog box, make sure that
SEND CTRL-D
Before Each Job
and
SEND CTRL-D After Each Job
are set to
No
.
❏
TBCP (Tagged binary communications protocol) cannot be used as the Output Protocol setting.
Epson AcuLaser MX21/MX20 Series User's Guide
About the Printer Software
267