manualshive.com logo in svg

Epson AcuLaser MX20 Series, User Manual

Share
Download
Epson AcuLaser MX20 Series User Manual Download Page 49

2. Place an original on the document table, with the side to be scanned facing down.

Note:

❏

The area with a width of maximum 2.0 mm from the horizontal edge and 2.0 mm from the
vertical edge is not scanned.
1. Maximum unreadable area of 2.0 mm
2. Maximum unreadable area of 2.0 mm

2

1

❏

Always keep the document table clean.

3. Close the document cover gently so that the original does not move.

Note:

❏

Do not leave photographs on the document table for an extended period of time as they may stick
to the glass.

❏

Make sure the document is flat against the glass surface, otherwise the image will appear fuzzy
and out of focus. Also be sure to close the document cover to prevent interference from external
light.

Epson AcuLaser MX21/MX20 Series     User's Guide

Paper Handling     

49

Summary of Contents for AcuLaser MX20 Series































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands