manualshive.com logo in svg

Epson AcuLaser MX20 Series, User Manual

Share
Download
Epson AcuLaser MX20 Series User Manual Download Page 181

Replace Fax Backup Memory

Make sure that all received fax data is printed. Turn off the printer, wait several minutes, and then turn
it on again. If the memory utilization does not go to 0 %, clear the fax backup memory. If the error
occurs again, contact your dealer or a qualified customer support person for assistance.

Replace Maintenance Unit

The maintenance unit has reached the end of its service life. Replace the maintenance unit with a new
one. See “Replacing Consumable Products/Maintenance Parts” on page 194 for instructions.

The error clears automatically after you replace the unit and close all covers. The maintenance unit
service life counter is reset automatically.

When the error light is blinking, you can continue printing by pressing the 

Start

 button. However, the

print quality is not guaranteed from then on.

Replace Toner Cartridge

The toner cartridge has reached the end of its service life and need to be replaced. See “Replacing
Consumable Products/Maintenance Parts” on page 194 for instructions.

Reset

The printer’s current interface has been reset and the buffer has been cleared. However, other
interfaces are still active and retain their settings and data.

Reset All

All Printer Settings have been reset to the default configuration, or to the last settings that were saved.

ROM CHECK

The printer is checking the ROM.

Scanner Error

/

Scanner Error Cannot Be Executedxxxxxxx

An error occurred in the scanner unit. Turn off the printer, and then turn it on again several minutes
later. If the error occurs again, contact your dealer or a qualified customer support person for
assistance.

Scanner Error Unable to Scan

/

Scanner Error Unable to Copy

Epson AcuLaser MX21/MX20 Series     User's Guide

Using the Control Panel     

181

Summary of Contents for AcuLaser MX20 Series































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands