Epson Aculaser CX16NF User Manual Download

Page: 51 / 213

Use plain paper that is

❏

Suitable for plain paper printers and copiers, such as standard or recycled office paper.

Note:

Do not use the media types listed below. These could cause poor print quality, media misfeeds, or damage
to the machine.

DO NOT use media that is

❏

Coated with a processed surface (such as carbon paper and colored paper that has been treated)

❏

Carbon backed

❏

Unapproved iron-on transfer media (such as heat-sensitive paper, heat-pressure paper, and
heat-press transfer paper)

❏

Cold-water-transfer paper

❏

Pressure sensitive

❏

Designed specifically for inkjet printers (such as superfine paper, glossy film, and postcards)

❏

Already been printed on by another printer, copier, or fax machine

❏

Dusty

❏

Wet (or damp)

Note:

Keep media between 15% and 85% relative humidity. Toner does not adhere well to moist or wet
media.

❏

Layered

❏

Adhesive

❏

Folded, creased, curled, embossed, warped, or wrinkled

❏

Perforated, three-hole punched, or torn

❏

Too slick, too coarse, or too textured

❏

Different in texture (roughness) on the front and back

❏

Too thin or too thick

AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide

Media Handling

Summary of Contents for Aculaser CX16NF






















































































































































































































Search results

Summary of Contents for Aculaser CX16NF

Reviews:

Related manuals for Aculaser CX16NF

Brands by name

Popular brands

Epson Aculaser CX16NF, User Manual

Search results

Summary of Contents for Aculaser CX16NF

Reviews:

Related manuals for Aculaser CX16NF

Brands by name

Popular brands