Epson Aculaser CX16NF User Manual Download

Page: 199 / 213

Kit Contents

❏

500-sheet paper cassette unit with a tray

Installing Tray 2

Note:

Since consumables are installed in the machine, be sure to keep the machine level when moving it in order
to prevent accidental spills.

1. Turn off the machine and disconnect the power cord and interface cables.

2. Remove the dust cover from Tray 1.

Close Tray 1 and the output tray.

3. Prepare the 500-sheet paper cassette unit.

Note:

Be sure to place the 500-sheet paper cassette unit on a level surface.

AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide

Installing Accessories (AcuLaser CX16NF only)

199

Summary of Contents for Aculaser CX16NF






















































































































































































































Search results

Summary of Contents for Aculaser CX16NF

Reviews:

Related manuals for Aculaser CX16NF

Brands by name

Popular brands

Epson Aculaser CX16NF, User Manual

Search results

Summary of Contents for Aculaser CX16NF

Reviews:

Related manuals for Aculaser CX16NF

Brands by name

Popular brands