3. Press the
u
or
d
key to select
SPEED DIAL
, and then press the
Select
key.
4. Use the keypad to type in the number (between 1 and 220) for the speed dial destination, and then
press the
Select
key.
5. Press the
u
or
d
key to select
LDAP SEARCH
, and then press the
Select
key.
Note:
If an LDAP server is not specified,
LDAP SEARCH
does not appear.
6. Press the
u
or
d
key to select
NAME
or
, and then press the
Select
key.
Note:
To search registered names, select
NAME
. To search e-mail addresses, select
.
7. Use the keypad to type in the search keyword (maximum of 10 characters), and then press the
Select
key.
The search begins, and the search results appear after a while. If no data matches the search
keyword,
NOT FOUND
appears for about two seconds.
Note:
❏
For details on entering/editing text, refer to the Facsimile User’s Guide.
❏
Text starting with the first character of the maximum 10 characters is searched for. Text will not
be found if the search keyword is in the middle of a word.
8. Press the
u
or
d
key to select the desired data, and then press the
Select
key.
Note:
❏
To check the found information, press the
r
key.
❏
An e-mail address exceeding 64 characters cannot be specified. If such an e-mail address is
specified,
ADDRESS IS TOO LONG
appears for about two seconds, and then the screen for
specifying the destination address appears.
❏
To narrow down the search results, press the
Back
key, and then perform step 7 again.
9. If desired, edit the registration name, and then press the
Select
key.
10. If desired, edit the e-mail address, and then press the
Select
key.
The settings are registered, and the
DIAL REGISTER
menu appears again.
AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide
Using the Scanner
110
