Epson Aculaser CX16NF User Manual Download

Page: 200 / 213

4. Lift the machine and place it on top of the 500-sheet paper cassette unit, making sure that the

positioning pins on the 500-sheet paper cassette unit correctly fit into the holes on the bottom of
the machine.

Warning:

This machine weighs approximately 21 kg (46 lb) when it is fully loaded with consumables.

5. Open Tray 1 and reattach the dust cover.

6. Load paper into Tray 2.

For details on loading paper, refer to “Tray 2” on page 62.

7. Insert Tray 2 into the machine.

AcuLaser CX16 Series Printer / Copier / Scanner User’s Guide

Installing Accessories (AcuLaser CX16NF only)

200

Summary of Contents for Aculaser CX16NF






















































































































































































































Search results

Summary of Contents for Aculaser CX16NF

Reviews:

Related manuals for Aculaser CX16NF

Brands by name

Popular brands

Epson Aculaser CX16NF, User Manual

Search results

Summary of Contents for Aculaser CX16NF

Reviews:

Related manuals for Aculaser CX16NF

Brands by name

Popular brands