Entron EN1000 series, Installation And Operation Manual

Page: 39 / 131

Page 37
5.4 EXTENDED FUNCTIONS
The EN1000 EXTENDED FUNCTIONS allow the operator to change normal operation
modes and add various operating functions that are useful for special applications of the
control.
The Extended Functions are used instead of Jumper or Dip-switch settings. They are
accessible from the front panel. To access the Extended Functions, simply click the
SELECT push-button until the indicator LED reaches Slope Count, then click once more.
At this point the top display will show [
01
]. By clicking the SCHEDULE Push-Buttons, the
extended functions are visible in the bottom display. For most features, such as Chaining
schedules, or Successive initiations, it is not necessary to enable functions. For some others,
it is necessary to just enable a front panel accessible
Extended Function such as the Stepper, [
=!Z!
]. For
others, it is necessary to add optional hardware to the
base control, such as the Integrated Pressure Sense
Control System or Constant Current operation.
To change settings of the EXTENDED FUNCTIONS,
use SELECT to step ONCE past SLOPE COUNT.
At this point, all function indicator LEDs are off and the
DATA
display shows [
01
]. This indicates that the
control is in the EXTENDED FUNCTION mode, and
these functions can be altered or viewed.
T o v i e w t h e
EXTENDED FUNCTIONS, press the SCHEDULE
push-buttons and step in either direction through the
available EXTENDED FUNCTIONS. When a desired
parameter is shown by the SCHEDULE display, the
DATA display will show the current value of that
selection.
To exit the EXTENDED FUNCTIONS mode, press SELECT to advance the function
indicator one more time.
StockCheck.com