900-00277-01-001 Rev A
21
User Interface
Network Tab
This tab shows the information for connection to a personal computer or network. As these settings
can be customized (see page 32), not all items may match what is shown here.
Wireless
— The connection state when using a wireless (“wi-fi”) network connection.
Disabled
— The configuration has manually disabled the connection.
Disconnected
— The wireless interface is enabled but is not able to connect.
Connected
— The interface is enabled and connected.
Limited
— The interface has a connection to the local network, but cannot reach external resources,
such as internet.
SSID
— Service Set IDentifier; the designated name of the user’s wireless network.
IP Address
— Internet Protocol address; the unique identifier assigned to the Mojave inverter.
Netmask
— The subnet “mask” assigned to the Mojave inverter.
Gateway
— The IP address of the device used to transfer requests between internet and local network.
This often refers to the system’s router.
Wired
— The connection state when using a wired (cable) network connection.
Disabled
— The configuration has manually disabled the connection.
Disconnected
— The wireless interface is enabled but is not able to connect.
Connected
— The interface is enabled and connected.
Limited
— The interface has a connection to the local network, but cannot reach external resources,
such as internet.
IP Address
— Internet Protocol address; the unique identifier assigned to the Mojave inverter.
Netmask
— The subnet “mask” assigned to the Mojave inverter.
Gateway
— The IP address of the device used to transfer requests between internet and local network.
This often refers to the system’s router.
DNS1
and
DNS2
— Domain Name Server; the IP addresses for the first and second servers used to
resolve domain names into IP addresses.
MAC Address
— the unique address of the Mojave inverter hardware; used to register with OPTICS RE.
See page 25.
OpticsRE
— The status of connection to the OPTICS RE website. See page 25.
Disconnected
— The inverter is not communicating with the OPTICS RE website
Connected
— The inverter is communicating with the OPTICS RE website.
