30
900-00277-01-001 Rev A ©2021 OutBack Power. All Rights Reserved.
Operation
Admin Tab
Figure 18 Admin Tab (SETTINGS View)
The page displayed by this tab allows login for
greater access to settings. To log in, select the
User
level, enter the
Password
, and press
Submit
. (See Figure 18.)
UserName
— Range:
Owner
,
Installer
,
Admin
.
Default:
Owner
.
This item selects the access level for settings.
These passwords are also used for initial UI login
as described on page 11.
The
Owner
settings allow changes to items under
the
Network
,
Inverter
,
Battery
, or
Generator
tabs.
The
Installer
settings can change the grid-protection
settings under the
Grid
tab.
The
Admin
selection is reserved for future use.
Password
— The default password is the same in
all three cases. It consists of the last eight digits of
the inverter’s serial number. For example, in a unit
with the serial number OGHI2107E0100236, the
default password would be E0100236. The serial
number can be found on a label directly beneath
the wi-fi antenna as shown in Figure 19.
After installation, it is recommended that all
passwords be changed for security.
Figure 19 Serial Number
