900-00277-01-001 Rev A
29
Operation
Description of Inverter Operations
Most of the operations and functions can be programmed from the user interface
SETTINGS
view.
This allows customization or fine tuning of inverter performance. Some of the inverter’s operations
occur automatically. Others are conditional or must be enabled manually before they will operate.
This section is organized using the six tabs available under the
SETTINGS
view:
Inverter
,
Grid
,
Generator
,
Battery
,
Network
, and
Admin
. These may not be in the same order as shown here.
Each section shows the settable items available under each tab. Following the list of items is a
description of the related inverter functions.
Some of the items in this section are functions which can be manually selected, enabled, or
customized. Other items are general topics or applications for the inverter. Any of these items may
need to be adjusted so that the inverter is best matched to a particular application. The operator
should review these items to see which are applicable.
SETTINGS View
The six selections under the
SETTINGS
view (tabs) are described beginning below. Each tab has
different options. This view does not include the inverter’s operating graphics. Instead, each of the
following
Tab
topics shows the settable items available under each tab. Following the list of items
is a description of the related inverter functions.
After making any changes under a tab, press
Submit
to send the changes to the system.
Select
Reset
to return that tab’s values to factory default settings. Press
Submit
to finalize the
Reset
.
Press
Help
to restart the “walk-through” overlay for that tab. (See page 11).
Figure 17 SETTINGS View (Default)
