EnerSys OutBack POWER Mojave, Operator'S Manual

Page: 10 / 100

10
900-00277-01-001 Rev A ©2021 OutBack Power. All Rights Reserved.
Introduction
Inverter Functions
Battery-to-AC inverting which delivers power to run backup loads and other functions

Split-phase output

Model OGHI8048A can continuously produce up to 8 kVA (33 Aac)
AC-coupled interaction

Mojave inverter accepts power on G
RID
connection and transfers it to protected L
OAD
connection

GD inverter is present on L
OAD
and maintains G
RID
connection through the Mojave inverter

L
OAD
connection accepts exported power from GD inverter and exports it back to G
RID
 Any loads on the Mojave inverter output will also be supported by the GD inverter production.
 During grid loss, the Mojave inverter’s protected load output will keep the GD inverter energized;
exported power from the GD inverter will be used to run loads
AC-to-battery charging

Requires split-phase input and a neutral conductor

During AC coupling, surplus GD inverter power can be used to charge the Mojave battery
Dual AC inputs allow direct wiring to multiple sources

Utility grid

AC generator
Rapid transfer between AC source and inverter output with minimal delay time
Automatic generator start (AGS) function in the event of low batteries or other conditions
Listed by UL to UL 1741 (2nd Edition with supplements SA and SB) and CSA 22.2 #107.1-16
Meets SunSpec IEEE 2030.5-2018 CSIP

Provides secure communications protocols with utility companies

Certified for California Rule 21 Phase 2 and Phase 3, Functions 1 and 8
CAUTION: Equipment Damage
 This product is for use in backup power and AC-coupled applications. Use with
independent solar charge controllers is not supported at this time.

This product is designed and tested for stationary applications only. It is not listed or
warranted for mobile use
.
 This product is designed for use with the external current transducers included in the
box. Other current transducer products must not be used.
Accessories
IMPORTANT:
The Mojave OGHI8048A inverter includes integrated communications and does not require
accessories such as a system display. It is not compatible with previous system display
products, including MATE-class or MATE3-class system displays. It is not compatible with
HUB products or FM-class charge controllers.
Table 1 Accessories Included
Included in Inverter Packaging Included in ESS Packaging
Mojave Literature ESS Literature Wiring Gutter/Cover
Inverter Hardware Battery Hardware Ground-Bonding Conductor
Mounting Bracket External Covers (2) Battery Cables
Wi-Fi Antenna Labels CAT5E Cable
Current Transducers (2)