900-00277-01-001 Rev A
57
Operation
Socket wrench, torque
13 mm socket
Screwdriver, torque, flat
bl d
Tools Required
Socket
wrench
7
/
16
" socket
5 mm hex (Allen) driver
Battery Features
Figure 28 Features
Mounting
The Mojave ESS battery must be installed on a level surface. To protect against accidental tipping,
the battery must be anchored against a wall or similar surface.
To mount the battery:
1. Four rubber bumpers are provided in the hardware kit. Install these bumpers into the rear of the battery
by pushing them into the holes designated by
D
in Figure 29.
Figure 29 Rubber Bumpers
A
C
B
o
Circuit Breaker (
A
)
. This item completely
removes the battery from the circuit.
o
On/Off Switch (
B
)
. This item turns battery
functionality on or off. When off, the battery is
unable to supply power or receive a charge.
Hold this button down for 5 seconds to
turn the battery on or off. There will be a
10-second delay after pressing before the
battery turns off.
o
LED Indicator (
C
)
. This item depicts battery
operating status. See page 61.
D
D
D
D
