900-00277-01-001 Rev A
63
Troubleshooting
FAQ
Table 4
Frequently Asked Questions
Question Answer
What is the default password?
The default password for all access levels (
Owner
,
Installer
,
Admin
) consists of the last eight digits of the
unit’s serial number. See page 30.
What is the inverter’s IP address?
The IP address is 192.168.2.2.
I forgot my password. How do I reset it?
Owner
: enter the incorrect password and use the
Reset
button. See page 31.
Installer
: Consult OutBack Power.
Admin
: Consult OutBack Power.
Why is there a difference between my own
handheld meter readings and the readings on
the UI?
Differences in both reading tolerances and calibration
may result in different figures. In addition, efficiency
losses are not always taken into account.
Can I turn off AC coupling?
No. See page 35.
Does this inverter have a mode for exporting
power from other DC sources (”DC coupling”)?
No. See page 10.
Can I use lithium-ion battery models other than
those discussed in this book?
No. See page 44.
Can I use current transducer products other
than those discussed in this book?
No. See page 10.
Can I interface the Mojave inverter with
previous products by OutBack Power?
No. See page 10.
Can I use ACC power during ToU to charge
the battery?
Yes. See page 37.
