900-00277-01-001 Rev A
23
User Interface
SETTINGS View
This view allows functions to be changed. Selecting any of the tabs that were already discussed
(
Inverter
,
Battery
,
Grid
,
Generator
,
Network
) brings up a table with set points related to that topic.
This view also depicts a sixth tab,
Admin
, which permits login for higher-level access.
Selecting any tab in this view causes a gray box to appear around it.
Figure 10 User Interface (SETTINGS View, Inverter Tab)
Each tab is addressed in the
Operation
chapter. This section of the book describes all inverter
functions and explains the use of each setting. (The tabs may appear in a different order in
Operation
than they do here.)
Inverter
— Allows settings for all inverter functions, including Time of Use (ToU). See page 33.
Grid
— Allows settings for grid-related functions while connected. See page 39. Most items can only be
adjusted by users with
Installer
access, after entering a password under the
Admin
tab. See page 30.
Generator
— Allows settings for all generator functions, including automatic generator start (AGS).
See page 46.
Battery
— Allows settings for all battery functions, including various charging profiles for differing battery
chemistries. See page 44.
Network
— Allows settings for connection to a personal computer or network. See page 32.
Admin
— Allows the selection of three access levels for the
Grid
tab. See page 30.