900-00277-01-001 Rev A
73
Service
Removal of Covers
Figure 35 Removal of Covers
To remove the covers:
4. Using a 5 mm hex (Allen) wrench, remove 4 screws from the cover. Remove the cover. See
A
in Figure 35.
5. Open the wiring compartment door by pressing the latch at
B
. The door swings to the right. Remove the
door by pulling inward on the pins
C
at the corners of the door.
6. Inside is a “dead front” which prevents accidental contact with anything other than the circuit breakers.
To remove the dead front, remove the two screws
D
from the corners of the dead front. The dead front
will rotate forward from the top, but is slotted in place at the bottom. Remove the dead front by pulling
upward and out. See
E
.
Removal is complete. Proceed to the replacement instructions.
A
B
C
D
D
