Endress+Hauser Solimotion FTR20, Operating Instructions Manual

Page: 52 / 60

Solimotion FTR20 Repair
52 Hauser
The electronics are attached to two self-clamping spacers and secured with a screw. To replace
the electronics, proceed as follows:
Loosen the screw
Detach the electronic insert by pulling it from the two spacers and take it out of the device
vertically
Insert the new electronic insert into the housing vertically, gently push it onto the spacers
to snap it in and fasten it with the screw (1 ... 2 Nm)
11�3 Return
The device has to be returned in the event of repair, incorrect delivery or incorrect ordering.
As an ISO- certified company and due to legal regulations, Hauser is obligated to use
particular handling techniques for all returned products that have come into contact with a
medium.
To ensure the safe, proper and fast return of your device:
Learn about the procedure and basic conditions at the Hauser Internet site
www.services.endress.com/return-material
Preprinted form of the "Declaration of Contamination"
→

TI00447F/97/EN
11�4 Disposal
If required by the Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE), our products are marked with the depicted symbol in order to minimize the disposal
of WEEE as unsorted municipal waste. Such products may not be disposed of as unsorted
municipal waste and can be returned to Hauser for disposal at conditions stipulated
in our General Terms and Conditions or as individually agreed.
11�4�1 Device removal
Perform the installation and connection steps from the "Installing the FTR20" (→ 14)
and "Connecting the device" (→ 18) in reversed order, taking into account the safety
guidelines.
Danger to persons from process conditions! Take care in the presence of dangerous process
conditions, such as high temperatures or aggressive or corrosive media.
11�4�2 Disposing of the device
Danger to personnel and the environment from media that are hazardous to health�
Ensure that the device and all cavities are free of any residual media that are hazardous to
health or the environment, e.g. substances that have seeped into crevices or diffused through
plastic.