Solimotion FTR20
Electrical connection
Hauser
21
6�3�3
Connection of F34 housing (aluminium)
3 2 1
7
6
5
4
9
Device connection F34 housing
1
Cable gland (clamping area 7 to 10.5 mm)
2
Connection cable
3
M12 connector (Binder type 713/763)
4
Harting connector type HAN8D
5
Internal potential equalization connection
6
Connection terminals
7
External potential equalization connection
Procedure of connection:
Insert cable into cable gland, tighten the cap nut (torque of up to 10 Nm).
Connect the protective ground.
Connect the power supply and signal output.
Procedure of connection with connectors:
Connect the protective ground.
Connect the connectors and fix them.
• For the electrical connection with connectors there are suitable mating connectors available
for order according to the product configurator or also as accessory.
• Prefabricated connection cables with suitable mating connectors are also available as
accessory.
• For more information on the range of available accessories
→
54
Summary of Contents for Solimotion FTR20
Page 58: ...Solimotion FTR20 58 Endress Hauser ...
Page 60: ...www addresses endress com ...
