Solimotion FTR20
Electrical connection
Hauser
19
6�3�1
Connection of F16 housing (plastic)
1
2
3
4
5
7 6
7
Device connection F16 housing
1
Connection terminals
2
Internal potential equalization connection
3
External potential equalization connection
4
Cable gland (clamping areas 5 to 10 mm as per EN 50262 or 7 to 10 mm as per UL-514 B)
5
Connection cable
6
M12 connector (Binder series 713/763)
7
Harting connector type HAN8D
Procedure of connection with terminals and cable glands:
Insert cable into cable gland, tighten cap nut until the rubber seal is touched all around
and then tighten cap nut with by ½ turn.
Connect the protective ground.
Connect the power supply and signal output.
Procedure of connection with connectors:
Connect the protective ground.
Connect the connectors and fix them.
• For the electrical connection with connectors there are suitable mating connectors available
for ordering according to the product configurator or as accessory.
• Prefabricated connection cables with suitable mating connectors are also available as
accessory.
• For more information on the range of available accessories
→
54
Summary of Contents for Solimotion FTR20
Page 58: ...Solimotion FTR20 58 Endress Hauser ...
Page 60: ...www addresses endress com ...
