FieldPort SWA50
Additional DTM functions
Hauser
67
12
Additional DTM functions
12.1 Lock / Unlock
This page is used to protect the FieldPort from unauthorized access via the DTM. If the lock
is activated and DIP switch 3 is set to "On", parameterization via Bluetooth is still possible.
If the "Device configuration locked" option is activated in the "Standardized Status 0" section,
DIP switch 3 is set to "Off" and parameterization via Bluetooth is not possible.
Description of parameters on the "Lock / Unlock" page
Parameter
Description
Lock Code
Select the type of lock for the DTM to the FieldPort.
Selection
• Unlocked: the FieldPort is not protected. All parameters can be modified.
• Lock Temporary: the FieldPort is locked. A FieldPort reboot or power failure will
unlock the FieldPort.
• Lock Permanent: the FieldPort is permanently locked. A FieldPort reboot or
power failure will not unlock the FieldPort.
• Lock All: the FieldPort is locked permanently for all masters.
If you select another option for the "Lock Code" parameter, the new option is active
immediately.
Lock Status
Displays the current access status of the DTM to the FieldPort.
If a check box is ticked, the statement applies.
Possible display
• Device Locked
• Lock is Permanent
• Locked by Primary Master (Reset if Secondary Master): the FieldPort has been
locked by the primary master.
• Configuration Cannot Be Changed
• Locked by Gateway
