Incoming acceptance and product identification
FieldPort SWA50
12
Hauser
4
Incoming acceptance and product
identification
4.1
Incoming acceptance
• Check the packaging for visible damage arising from transportation
• Open the packaging carefully
• Check the contents for visible damage
• Check that the delivery is complete and nothing is missing
• Retain all the accompanying documents
The device may not be put into operation if the contents are found to be damaged
beforehand. In this case, please contact your Hauser Sales Center:
www.addresses.endress.com
Return the device to Hauser in the original packaging where possible.
Scope of delivery
• FieldPort SWA50
• Cable glands as per ordered version
• Optional: mounting bracket
Documentation included in delivery
• Brief Operating Instructions
• Depends on the version ordered: Safety Instructions
4.2
Product identification
4.2.1
Nameplate
The nameplate of the device is lasered onto the housing.
Additional information about the device is available as follows:
• Enter the serial number specified on the nameplate into the Device Viewer
(www.endress.com → Product tools → Access device specific information → Device
Viewer (from the serial number to device information and documentation) → Select
option → Enter serial number): All information relating to the device is then displayed.
• Enter the serial number specified on the nameplate into the
Hauser Operations App: All information relating to the device is then displayed.
4.2.2
Manufacturer's address
Hauser SE+Co. KG
Hauptstraße 1
79689 Maulburg
Germany
www.endress.com
4.3
Storage and transport
• The components are packed in such a way that they are fully protected against shock
when in storage and during transportation.
• The permitted storage temperature is –40 to +85 °C (–40 to 185 °F).
• Store the components in the original packaging in a dry place.
• Where possible, only transport the components in the original packaging.