FieldPort SWA50
Installation
Hauser
17
7.
+ IN
+ IN
7
28
(0.
)
7
28
(0.
)
28 (1.10)
A0041551
Ensure that the cores are of sufficient length to be connected in the field device. Do
not shorten the cores to the required length until you are connecting them in the
field device.
If using a cable gland for shielded cable, follow the instructions for stripping
→ 30.
• Electrical connection for 2-wire HART field devices with passive current output:
• Electrical connection for 4-wire HART field devices with passive current output:
• Electrical connection for 4-wire HART field devices with active current output:
• Electrical connection for FieldPort SWA50 without HART field device: → 32
8.
A0041552
Tighten screws for strain relief. Torque: 0.4 Nm ± 0.04 Nm
