Description of device parameters
Deltabar FMD71, FMD72
44
Prerequisite
"Simulation Mode" = Alarm/Warning
Value at switch-on
484 (Simulation active)
Direct access (119)
Navigation
Expert → Direct access (119)
Write permission
Expert
Description
Enter the direct access code to go directly to a parameter.
Options
Enter the desired parameter code.
Note
For direct access, it is not necessary to enter leading zeros.
Factory setting
0
Lock Switch (120)
Navigation
Expert → System → Lock Switch (120)
Write permission
Expert
Description
Displays the status of DIP switch 1 on the electronic insert. You can lock or unlock
parameters relevant to the measured value with DIP switch 1. If operation is locked by
means of the "Operator Code" (021) parameter, you can only unlock operation again by
means of this parameter.
Display
• On (locking switched on)
• Off (locking switched off)
Factory setting
Off (locking switched off)
Electr.serial no (121)
Navigation
Expert → System → Instrument info → Electr. Serial No. (121)
Write permission
No write permissions. Parameter is read only.
Description
Displays the serial number of the main electronics (11 alphanumeric characters).
Sens. Ser. No HP (122)
Summary of Contents for Deltabar FMD71
Page 2: ......
