Endress+Hauser Deltabar FMD71, Description Of Device Parameters

Page: 37 / 68

Deltabar FMD71, FMD72 Description of device parameters
37
Write permission Operators/Service engineers/Expert
Description Displays the current current value.
ALARM STATUS (071)
Navigation Expert → Diagnosis → Diagnostic Code (071)
Write permission No write permissions. Parameter is read only.
Description Displays the diagnostic message with the highest priority currently present.
Last diag. code (072)
Navigation Expert → Diagnosis → Last Diag. Code (072)
Write permission No write permissions. Parameter is read only.
Description Displays the last diagnostic message that occurred and was rectified.
Note • Digital communication: the last message is displayed.
• Use the "Reset logbook" parameter to clear the messages listed in the parameter "Last
diag. code".
Min. meas. press. (073)
Navigation Expert → Diagnosis → Sensor HP → Minimum Pressure (073)
Write permission No write permissions. Parameter is read only.
Description Displays the lowest pressure value measured (peakhold indicator). You can reset this
indicator by means of the "Reset peakhold" parameter.
Max. meas. press. (074)
Navigation Expert → Diagnosis → Sensor HP → Maximum Pressure (074)
Write permission No write permissions. Parameter is read only.
Description Displays the highest pressure value measured (peakhold indicator). You can reset this
indicator by means of the "Reset peakhold" parameter.