Description of device parameters
Deltabar FMD71, FMD72
52
Secondary Value Is (149)
Navigation
Expert → Communication → HART output → Secondary Value Is (149)
Write permission
No write permissions. Parameter is read only.
Description
Indicates which measured value is transmitted via the HART protocol as the secondary
process value. The process value is configured via HART command 51.
Factory setting
• "Pressure" measuring mode: "Measured pressure HP"
• "Level" measuring mode, Lin. mode "Linear": "Measured differential pressure"
• "Level" measuring mode, Lin. mode "Activate table": "Level before linearization"
Display
Depending on the selected measuring mode, the following measured values can be
displayed:
Measured value
Measuring mode
Measured differential pressure
Level, pressure
Corrected pressure
Level, pressure
Measured pressure HP
Level, pressure
Sensor press. HP
Level, pressure
Sensor temperature HP
Level, pressure
Measured pressure LP
Level, pressure
Sensor press. LP
Level, pressure
Sensor temperature LP
Level, pressure
Level before linearization
Level
Tank content
Level
Process density
Level
Temperature of electronics
Level, pressure
Secondary Value (150)
Navigation
Expert → Communication → HART output → Secondary Value (150)
Write permission
No write permissions. Parameter is read only.
Description
The secondary value is displayed.
Third Value Is (151)
Navigation
Expert → Communication → HART output → Third Value Is (151)
Summary of Contents for Deltabar FMD71
Page 2: ......
